Follow us at Social Media Youtube @ITChasers
The Huawei SUN2000-100KTL-M1 inverter is an uncompromisingly powerful module for large-scale solar power systems. It converts the electricity generated from sunlight into grid-standard alternating current. This is available on site or for feeding into the grid. The dimensions of 1035 x 700 x 365 mm are compact for an inverter of this power class, the weight is 90 kg. Installation is therefore best done by two or three people. The DC connection to the PV system is made via plug-in connections, so that commissioning is quickly completed. The Huawei FusionSolar app helps with the setup. The Huawei SUN2000-100KTL-M1 inverter also connects effortlessly with smart components. It supports RS485 communication, for example, with the smart logger. The data can be viewed via the FusionSolar management system.
In summary, the Huawei SUN2000-100KTL-M1 inverter offers numerous advantages, including the module already has overvoltage protection (type 2 for DC and AC). In addition, ten independent MPP trackers are installed at the factory. Another pleasant feature is the low noise level thanks to modern active cooling. The output of 110,000 watts corresponds to the needs of a large system, the MPPT voltage range is between 200 and 1000 volts. The maximum efficiency reaches an astonishing 98.8 percent, the European efficiency 98.6 percent. All this ensures a high yield during operation.
Max. Efficiency 98.8%
10 MPP tracker
Fuse-free design
IP66 protection
MBUS supports
Type II arrester for DC & AC
Betriebstemperaturbereich: -25 ~ +60 °C
Relative Betriebsfeuchtigkeit: 0 % RH~100 % RH
Betriebshöhe: max. 4.000 m
Kühlung: Intelligente Luftkühlung
Anzeige: Status LED´s
Kommunikation: RS485, 4G/3G/2G*, MBUS**
Gewicht (mit Montageplatte): 90 Kg
Abmessungen: 1.035 x 700 x 365 mm
Schutzart: IP66
Topologie: Transformatorlos
Energieverbrauch nachts: < 3.5 W
Max. Input voltage1: 1.100 V
MPPT operating voltage range2: 200 V ~ 1,000 V
Starting voltage: 200 V
Rated input voltage: 600 V
Max. Max. input current per MPPT: 26 A
Max. short-circuit current: 40 A Short circuit current: 40 A
Number of MPP trackers: 10
Number of inputs: 20
Netzanschluss: Dreiphasig
Nennleistung: 100.000 W
Maximale Scheinleistung: 110.000 VA
Nennausgangsspannung: 152 A @380 V, 144,4 A @400 V, 120,3 A @480 V 277 V / 480 V, 3W +(N)+ PE
AC – Netzfrequenz: 50 Hz / 60 Hz
Maximaler Ausgangsstrom: 91.2 A
Einstellbarer Leistungsfaktor: 0.8 kap. … 0.8 ind.
Klirrfaktor (THD): < 3%
Max. Efficiency: 98.8 %
European efficiency: 98.6 %
DC load break switch: Yes
Islanding detection: Yes
AC overcurrent protection: Yes
DC reverse polarity protection: Yes
String monitoring: Yes
DC overvoltage arrester: Type II
AC overvoltage arrester: Type II
Insulation monitoring: Yes
Fault current monitoring: Yes
EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 61727, IEC 60068, IEC 61683
VDE-AR-N4105, EN 50549-1, EN 50549-2, RD 661, RD 1699, C10/11
Further information on conformity to standards is available on request.
PV connector
Bluetooth dongle (for commissioning via FusionSolar app)
Bracket
1 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would likely damage the inverter.
2 Any DC input voltage above the operating voltage range can lead to faulty operation-.
* via 4G dongle (optional)
** works with Smartlogger300A03 (transformer required)