Follow us at Social Media Youtube @ITChasers
The Huawei SUN2000-17KTL-M2 inverter converts the direct current of the solar modules into standard household alternating current. This makes it an indispensable component - with its high efficiency, it ensures optimal efficiency of the entire system. The dimensions of the Huawei SUN2000-17KTL-M2 inverter are 525 x 470 x 262 mm, making the device convincing with its compact design. At 25 kg, the weight is also pleasantly low for a component of this type - installation can be carried out by two people or even alone. Integration is effortless with the plug-in connections. The component has RS485 communication for data exchange with the Smart Power Meter. Commissioning is made much easier by the Huawei FusionSolar app, so that it can be successfully completed in just a few minutes.
The advantages of the Huawei SUN2000-17KTL-M2 inverter are many. The inverter is also equipped with overvoltage protection (type 2 for AC and DC), as well as two independent MPP trackers. The pleasantly quiet operating noise is also positive: natural convection is sufficient for cooling. The Huawei SUN2000-17KTL-M2 inverter has a rated power of 17,000 watts, the voltage range is from 160 to 950 volts. The maximum efficiency of 98.65% is very high, which allows the entire system to operate extremely efficiently. The European efficiency is specified at 98.3 %.
Max. Efficiency 98.65%
Up to 30% more energy with optimizers
only 25 Kg
WLAN, Fast Ethernet, 4G Supported communication
AI-supported arc detection AFCI
Betriebstemperaturbereich: -25 ~ +60 °C
Relative Betriebsfeuchtigkeit: 0 % RH~100 % RH
Betriebshöhe: 0 – 4.000 m (Derating > 2.000 m)
Kühlung: Konvektionskühlung
Anzeige: Status LED´s
Kommunikation: RS485, WLAN/Ethernet*, 4G/3G/2G*
Gewicht (inkl. Befestigungswinkel): 25 Kg
Abmessungen (inkl. Befestigungswinkel): 525 x 470 x 262 mm
Schutzart: IP65
Energieverbrauch nachts: < 5.5 W (<10 W, wenn die PID-Wiederherstellungsfunktion aktiviert ist)
Recommended maximum PV power125,500 Wp
Max. Input voltage2: 1.080 V
Operating voltage range3 : 160 V ~ 950 V
Starting voltage : 200 V
Rated input voltage: 600 V
Max. Input current per MPPT: 22 A
Max. Short circuit current: 30 A
Number of MPP trackers: 2
Max. Number of inputs per MPPT: 2
Mains connection: Three-phase
Rated power: 17,000 W
Maximum apparent power: 18,700 VA
Rated output voltage: 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W + N+PE
AC mains frequency: 50 Hz / 60 Hz
Maximum output current: 28.5 A
Adjustable power factor: 0.8 cap. ... 0.8 ind.
Distortion factor (THD): ≤ 3%
Max. Efficiency: 98.65 %
European efficiency: 98.30 %
DC load break switch: Yes
Islanding detection: Yes
AC overcurrent protection: Yes
AC short circuit protection: Yes
DC reverse polarity protection: Yes
AC overvoltage protection: Type II
DC overvoltage protection: Yes, compatible with protection type TYPE II according to EN / IEC 61643-11
Residual current monitoring: Yes
Arc detection: Yes
Ripple control receiver inputs: Yes
Integrated PID recovery4: Yes
SUN2000-450W-P
EN/IEC 62109-1, EN/IEC 62109-2
G98, G99, EN 50438, EN 50549, CEI 0-21, CEI 0-16, VDE-AR-N-4105, VDE-AR-N-4110, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, P.O. 12.3, TOR D4, IEC61727, IEC62116, DEWA
Huawei SUN2000-17KTL-M2 - included in delivery
PV Connectors
AC connectors
Signal cable connector
Bracket
1 The maximum PV input power of the inverter is 40,000 Wp when long strings are designed and fully connected with SUN2000-450W-P current optimizers.
2 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would likely damage the inverter.
3 Any DC input voltage above the operating voltage range may cause faulty operation.
4 SUN2000-12-20-KTL-M2 raises the potential between PV and ground to above zero by built-in PID recovery function to recover the degradation of module from PID. Supported module types are: P-type (mono, poly)