|
Standards
|
• Draft IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1x (security authentication)
• 802.11i ready (security WPA2), 802.11e ready (wireless QoS)
|
Ports
|
Ethernet, Power
|
Buttons
|
Reset
|
Cabling type
|
Unshielded twisted pair (UTP) Category 5, Category 5 Ethernet or above for Gigabit Ethernet Interface
|
LEDs
|
Power, Ethernet, Wireless, PoE
|
Operating system
|
Linux
|
Setup/Configuration
|
Web user interface
|
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
|
Management
|
SNMP version
|
SNMP version 1, 2c, 3
|
Event logging
|
• Event logging
• Remote syslog
|
Web firmware upgrade
|
Firmware upgradable through web browser
|
Diagnostics
|
Flash, RAM, LAN, WLAN
|
Dynamic Host Configuration Protocol (DHCP)
|
DHCP client
|
Operating Modes
|
Access point
|
Access point mode
|
Wireless
|
Spec/modulation
|
Radio and modulation type: 802.11b/DSSS, 11g/OFDM, 11n/OFDM
|
Channels
|
Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
|
Internal antennas
|
None
|
External antennas
|
3 (omnidirectional)
|
Transmit power
|
Transmit power (adjustable) at normal temp range:
• 802.11b: 16 dBm at 1TX, 19 dBm at 2TX
• 802.11g: 13 dBm at 1TX, 16 dBm at 2TX
• 802.11n: 13 dBm at 1TX, 16 dBm at 2TX
|
Antenna gain in dBi
|
2
|
Receiver sensitivity
|
802.11.n: 300 Mbps at -69 dBm, 802.11.g: 54 Mbps at -73 dBm, 802.11.b: 1 Mbps at -88 dBm
|
Security
|
WEP/WPA/WPA2
|
WEP 64-bit/128-bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
|
Access control
|
Wireless connection control: MAC-based
|
Service set identifier (SSID) broadcast
|
SSID broadcast enable/disable
|
802.1X
|
IEEE 802.1X support
|
Quality of Service
|
QoS
|
• 4 queues
• WMM wireless priority
|
General
|
• New access point detection (used with Cisco WPC4400N Wireless-N Business Notebook Adapter
• New client detection (used with Cisco WPC4400N)
• Auto-channel selection
|
Environmental
|
Dimensions
(W x H x D)
|
7.80 x 5.16 x 7.80 in.
(198 x 131 x 198 mm)
|
Unit weight
|
0.84 lb (38 g)
|
Power
|
• 12V 1A DC input, and IEEE 802.3af compliant PoE
• Max power draw: 5.04W
|
Certification
|
FCC, CE, IC
|
Operating temperature
|
32º to 104ºF (0º to 40ºC)
|
Storage temperature
|
-4º to 158ºF (-20º to 70ºC)
|
Operating humidity
|
10% to 85% noncondensing
|
Storage humidity
|
5% to 90% noncondensing
|
Package Contents
|
• Cisco WAP4400N Wireless-N Access Point
• User guide on CD-ROM
• Ethernet network cable
• Power adapter
• Product stands
• Registration card
|
Minimum Requirements
|
• 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
• Switch/router with PoE support or PoE injector when used with PoE
• Web-based configuration: Java-enabled web browser
|